How To Make A Waterproof Changing Pad

This content contains affiliate links or sponsored elements, read our Disclosure Policy.

[vc_row 0=""][vc_column][vc_column_text 0=""]This waterproof diaper changing mat tutorial is perfect for slipping into a purse when you and your baby are on the go! With a few unproblematic materials you can make this useful baby accompaniment.

Materials

fat quarter of quilting cotton (or i/three yard)

one/3 yard PUL (polyurethane laminate) or other waterproof cloth

1/3 terry cloth (or reuse a hand towel)

24″ double fold bias tape or ribbon

Cut

21″ x 15″ out of EACH quilting cotton wool, terry cloth, and PUL

7.5″ square out of quilting cotton fiber

Sewing Essentials (pins, pair of scissors, etc.)

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column 0=""][vc_column_text 0=""]

Waterproof diaper changing mat tutorial:

Pace 1 – Brainstorm to Run up

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column width="2/3″][vc_single_image prototype="16783″ img_size="total"][vc_single_image prototype="16784″ img_size="full"][/vc_column][vc_column width="1/iii″][vc_column_text 0=""]Yous will need to get together the pattern.  For instructions on how to assemble the sewing pattern click here.

Place PUL with the waterproof (shiny) side up. Place quilting cotton on acme, correct side up.

Pin together and drip ane/4″ abroad from the raw edge.

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column 0=""][vc_column_text 0=""]

Footstep two – Make the Corner Pocket

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column width="ii/three″][vc_single_image image="16785″ img_size="full"][vc_single_image epitome="16786″ img_size="full"][vc_single_image paradigm="16787″ img_size="total"][/vc_column][vc_column width="1/3″][vc_column_text 0=""]Fold quilting cotton wool in half, incorrect sides together, along the diagonal to form a triangle and press.

Pivot the triangle to a lower corner of the terry fabric.

Baste the triangle in place with a ane/four″ seam allowance.

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column 0=""][vc_column_text 0=""]

Step 3 – Add the Ties

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column width="2/3″][vc_single_image image="16788″ img_size="full"][vc_single_image prototype="16789″ img_size="total"][vc_single_image image="16790″ img_size="full"][/vc_column][vc_column width="i/3″][vc_column_text 0=""]If you are using bias tape, stitch the long edge closed. Cutting in half and knot two of the ends. If yous are using ribbon, you tin can estrus seal the ends with a lighter instead.

Pin the un-knotted stop four″ from the corner on both the meridian and the bottom.

Baste the ties into place.

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column 0=""][vc_column_text 0=""]

Stride 4 – Finish the changing mat

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column width="2/three″][vc_single_image image="16791″ img_size="full"][vc_single_image epitome="16792″ img_size="total"][vc_single_image image="16793″ img_size="full"][vc_single_image epitome="16794″ img_size="full"][vc_single_image image="16795″ img_size="full"][/vc_column][vc_column width="1/three″][vc_column_text 0=""]Identify the quilting cotton/PUL layer on top of the terry cloth, right sides facing, and pin around the outside perimeter.

Stitch using a 1/two″ seam allowance. Go out a three″ opening for turning along one edge.

Clip the corners.

Turn right sides out through the opening and press. Pin the opening closed.

Topstitch around the perimeter, closing the opening at the same fourth dimension, with a ane/eight″ seam assart.

[/vc_column_text][/vc_column][/vc_row][vc_row 0=""][vc_column 0=""][vc_single_image epitome="17004″ img_size="full"][/vc_column][/vc_row]

Sweet! I only sent you lot can email!

Source: https://www.fleecefun.com/waterproof-diaper-changing-mat-tutorial/

Posted by: francisstims1950.blogspot.com

Share this post